Learning More...
Updated: Friday, March 14, 2008

First off, I want to let you the reader and seeker know that I do not know it all, and I am willing to learn more. In the future, feel free to share with me your experiences. I chose the machine I purchased after much research. With the following questions, I will be taking you on my journey buying Rife equipment, and I will share with you what I have learned. As I learn more, I will update this site.


IMPORTANT: As an experimenter with Rife equipment, you must make sure you pay close attention to the following: Diet, Nutrition (solutomic vitamins and minerals) and Emotional State of Being (spiritual state of mind). When you balance your diet, nutrition and state of mind (anger/hate), your experiments with Rife equipment will benefit you more.


What I Needed to Know Before I Bought My Rife Machine and Why...
I did a lot of reading and searching and these are the most important questions I wanted answered before I purchased a Rife machine for myself.

Did Rife use an analog or digital machine?

01. Did Rife use an analog or digital machine?
Dr. Royal Rife used analog, vacuum tube-based frequency instruments that delivered frequencies in the lower half of the audio range. John Crane was Rife's engineer for many years. All of Rife's experiments and his successes were based on using analog radio tube-based equipment, which could be tuned just like a regular radio to the desired station, or in this case frequency. Crane subsequently tried to use digital technology to replicate their earlier work, but he was never able to repeat Rife's experiments exactly. Knowing this, one should not ignore the time and energy they spent blazing their trail with success.


02. What is the difference between analog and digital machines?
a) There are thousands of frequencies between each positioned frequency on a digital machine that are missed when going from one frequency to the other. This means that when you set the dial to a specific frequency like 800 then move up the scale between 800 (800.0000) and 801 (800.9999). There are thousands of combinations of frequencies (resonant and harmonic) surrounding the target frequencies that are covered when using an analog machine.

b) These combinations of frequencies are missed when using any digital machine.

c) There is no frequency drift in an digital machine.

d) I have not found a Digital machine offered for sale that had enough power to carry frequency through the dense tissue of the body. I am especially concerned when the signal is transmitted through the air before it hits the intended subject.

e) There is a natural frequency drift in a Rife analog machine. This is a desired effect when trying to electrocute microbes that have the ability to mutate. I found that all digital machines are very underpowered. Remember, if the machine does not have enough power to carry the frequency through the tissue of the body, the intended treatment may fall short of expectations.


03. What equipment should I experiment with?
Time is money and money is time. It is best to find equipment that closely resembles the equipment that Rife and Crane used. Remember, their time and knowledge blazed the trail. While it may be possible to simulate Rife's work with highly refined digital equipment, it would be at a great expense. The original style equipment now available is still relatively inexpensive. Rife produced results with his equipment and achieved a very high success rate, in part due to the old fashioned (analog) equipment he used. The digital devices on the market do not duplicate Rife's original equipment.


04. What kind of machine do I need?
Rife designed the following equipment:
a) The Microscope, which allowed him to observe the microorganisms he studied.
b) The Ray Tube, which he used to confirm the mortal frequencies of these microorganisms.
c) The Frequency Instrument, with which he did most of his therapeutic work. This device treated the body directly.

I do not need a microscope or a ray tube, but I do need an Analog Frequency Instrument with established Rife frequencies that are ready to use with the instrument.


05. What is the difference between the output of the FREQUENCY INSTRUMENT and the output of the RAY TUBE?
Frequency instruments deliver frequencies through direct contact while Ray Tubes transmit frequencies indirectly through the air. If you hook up any frequency instrument to a microscope, any frequency, at any strength will destroy any microorganism! The reason being is that the direct contact is a thousands times more powerful than indirect contact. The ray tube, being an indirect contact device, requires much more power at the higher frequencies to deliver it's output. In other words, it requires more power to drive these higher frequencies (in the megahertz range) to be effective in your treatment. I began to suspect that the ray tube instruments were not accounting for this difference in strength between direct and indirect contact, and that they were, indeed, underpowered. Furthermore, the ray tubes on the market currently are digital, not analog!


06. What frequency range should the machine operate in?
In his laboratory, Rife experimented with the entire spectrum of frequency. When directing energy to the human body, however, the audio range is the safest. The mortal frequencies repeat several times over throughout the spectrum by virtue of harmonics. The lowest mortal spectrums – the audio range – are considered the base frequencies. I do not want any machine that operates in a microwave frequency range, and I think there are some of these out there. I have a microwave oven and I do not want a machine that produces this kind of frequency for my body. I will discuss this further in a subsequent question.


07. What different frequency delivery methods are there and what are the limitations of each?
There are several types of instruments currently available using different methods to deliver the frequencies they output to the body.

a) MAGNETIC DELIVERY – This kind of machine has a coil or chamber and uses pulsed magnetism. Magnetic delivery is the same as broadcast delivery in that it lacks the electro-stimulus effect, which can only be accomplished by direct application.

b) BROADCAST DELIVERY – Remember the Ray Tube Rife used with his microscope in order to determine the mortal frequencies? Many have continued to experiment with this type of device in treating humans. The external tube treatments used with today's ray tube equipment are either set up in a room for a radiation effect, or they are of a small design that is slowly passed over the targeted area of the body. The design of the tube and the gas contained in it determine the type of effect that the machine can achieve.

It is my opinion that the atmosphere contains many conflicting and competing frequencies, and this multitude of frequencies will interfere with any broadcast of a specific frequency that the machine outputs, no matter the power range of the equipment. If I cannot control the medium through which the frequency travels, how do I know that the frequency I am broadcasting is actually the frequency that is contacting my body, and that it has the power to carry through to the targeted area? I am a control freak and I need to know that I am receiving the right frequency with power strong enough to get the job done. I do not want any outside, uncontrolled interference between the origin of the frequency being generated and my body.

A tube used as a wand or a tube set up to project a frequency through the room may have its place, but it is not with me. I believe there are too many outside variables that can interfere with the intended frequency using a system like this. Even the design of the ray tube itself is a variable. These variables can cause you poor lab results in your experiments, making any success hard to duplicate. Realigning our bodies with a natural electrical field is a must when working to improve our health. After considering the above problems with broadcast frequency machines, I think the direct contact method of frequency delivery is the easiest and most controllable way for a novice in the field to achieve good, reproducable lab results.

c) DIRECT APPLICATION DELIVERY – After careful consideration, I concluded that this method is the best way to transmit frequencies through the body without any interference inbetween. The frequencies can be conducted directly by pads placed on the exact treatment area, or by placing the feet in tubs of water for an overall treatment. This concept makes a lot of sense after thinking about broadcast frequency machines. Clearly, a machine that is capable of direct contact and that has enough power to get the job done is needed for proper treatments.


08. What kind of warranty comes with the machine?
This is a big one! I needed to find a machine manufacturer that provided a very good warranty and technical support. I reasoned that the longer the warranty period offered, the more valuable the machine would be. The longer the warranty, it seems to me, the more confidence the manufacturer has in his equipment – 30 and 60 day warranties scare the hell out of me! I am looking for a company that would stand behind their product for a long time to come. It was also important to me that the company could help me with my experiments by giving me insight and confirming if my theory and lab technique has any substance to it. Without proper instruction, many experiments will not produce the best results, let alone those expected or intended.


09. How long has the company been in business?
Well, the warranty will not mean much good if the company does not stay in business long. To my way of thinking, the length of time a company has been in business is a usually good indication of the quality of the product and the service you can expect. Happy customers tell other customers, and unhappy customers do the same thing. I want a company with experience and knowledge, the kind that is only gained by being in business in the field for a long time.


10. What is the manufacturer's Rife machine experience?
The question I was grappling with was, "How do I know this is the real thing?". I wanted to make sure I was not buying a Saturday night special, if you know what I mean. I did not want to buy a copy of a copy unless it was a copy of the real thing. I need to find a manufacturer that has history and actual experience with an actual Rife machine if at all possible.


11. What does the equipment cost? Am I getting what I am paying for?
I did not want to repeat the many mistakes I have made in the past buying electronic equipment. Price is not a good reflection of quality of equipment. I know that good equipment will not be the cheapest available (when it comes to cheap, you get what you pay for), and scam machines usually cost more than the real thing. Been there, done that, not again.


12. Is the government or medical community doing any testing with this technology?
Below, I will share with you the links that I found when researching for this question:

13. Pieces of the Puzzle...
WARNING: If your are looking to purchase Rife Equipment, thinking it is THE ANSWER to YOUR health problem, please save your money and do not buy.

Rife Equipment, when used properly, is only one piece of the puzzle of your health.

NOTE: I have personally benefited from using the Rife for many health issues but it is not the only bullet that I have in my arsenal. See, I went to war on my health issues, and I am winning and learning.

You should think of your health issue as a problem or puzzle with many pieces, and Rife is just one piece. The big picture is giving your body what it needs to heal itself. Some of the pieces are listed below.

#1: Diet: Changing your diet is key. High pH Diet links

#2: Supplements: Taking the right kind, for the right problem, in the right form, in the right amount is an important step. High pH Therapy Packages and Liquid Mineral Supplements

#3: Rife: The right Rife equipment used the right way is another piece of the puzzle you are putting together. After eating the right diet and taking the right supplements, the effects of the Rife equipment will be better and the results last longer. Your body will amaze you when you put all the pieces of the puzzle together.

#4: Attitude: Your mental attitude is very important. A positive out look no matter what you are facing is most important and not to be left out.

IF you do not change your diet, then the supplements will not benefit you the way you are hoping. If you aren't getting those benefits, the Rife equipment won't have the desired effect. All these pieces work great together in the puzzle of health and fittness.


14. Learning More...
Images and specifications for the machine I found that was capable of everything I was searching for are now available. CLICK HERE

Call (800) 760-4947 for details.